Ping sends small ICMP echo packets to a host and measures how long each reply takes to come back. This online ping test sends up to five pings from our server to any public host name, IPv4 or IPv6 address and shows the time of each reply, the minimum, average and maximum, the TTL and the packet loss.
It is handy when you want to know whether a server is up from outside your own network, compare the latency of two hosts, or check a host from a phone where no ping command is available. Because the pings start from our server, the times show the distance between our server and the target, not your own connection.
How to use the Ping Test tool
- Enter a host name such as
example.comor an IP address. - Choose how many pings to send (1–5) and, if you want, IPv6 only.
- Click Ping and wait a few seconds.
- Read the reply times and packet loss.
Why use ToolOrca Ping Test
- Up to 5 ICMP echo requests per test
- Per-reply time and TTL with a small bar chart
- Minimum, average, maximum and packet loss
- IPv4 and IPv6 targets
- Explains what "no replies" really means
Reading ping results
Under 30 ms usually means the host is in the same region as our server; 100–250 ms is typical across continents. Large jumps between replies (jitter) or lost packets point to a congested or unstable path. The TTL value is the hop budget left when the reply arrived and hints at the operating system (64 is common for Linux, 128 for Windows) and the number of hops.
No reply does not always mean down
Many firewalls and cloud providers drop ICMP on purpose, so a server can run perfectly well while ignoring ping. If ping fails, test a real service with the port checker (port 80 or 443 for a website) or the HTTP headers checker. To see where packets get lost, run a traceroute.
Frequently asked questions
Why are the times different from my own ping?
The pings come from our server, not from your device, so they measure a different route.
Why only 5 pings?
To keep the tool fast and fair for everyone and to make sure it cannot be used to flood a host.
Can I ping an IPv6 address?
Yes, if our server has IPv6 connectivity. If it does not, the tool tells you.
Is ping the same as checking a website?
No. Ping tests the network path to the machine. A website can be down while ping works, and the other way round.
Can I check a device on my home or office network?
No. For safety, private and local addresses (192.168.x.x, 10.x.x.x, localhost, .local names and similar) are refused. Our server can only test public hosts on the internet.